Combined Cycle Power Plant

The term  ‘Combined Cycle Power Plant'Steam turbine power plant, which is, operates on
defines as the combination of the steam turbinethe Rankine cycle of the Combined Cycle
generator(s) (Rankine cycle) and the gas turbineOperation. The boiler will create the steam, where
generator(s) (Brayton cycle) with turbine exhaustthe pure water passes in the series of the tubes
waste heat boiler(s) to capture the energy forto capture the heat from firebox and after that
the production of the electric power. If the steamboils under the high pressure to superheated the
from the waste heat boilers used for spacesteam. The firebox heat is provided by the
heating process then the term co generator isburning fossil fuel like fuel oil, natural gas, coal etc.
the more appropriate word for this.The heat can also be provided by solar energy,
Simple cycle gas turbine generators, used as thebiomass or nuclear fuel.
independent electric power producers are reallyThe superheated steam then enters the steam
inefficient with the heat rates of the load of overturbine throttle where it connected generator to
15,000 Btu per kilowatt-hour. Simple cycle gasmake electricity. The heat from the condensing
turbine generators are the part of the Combinedsteam is then rejected normally from the
Cycle Power Plant, which you have to take acondenser to the body of the water, such as a
training to know the details of the power plantriver or cooling tower. Steam turbine plants have
very well. Combined Cycle Power Plant training isthe history of energy achieving the 95% and
the way to get the all details with the variouseasily can operate more than a year.
plants in built in it.Combustion turbine plants operate on the Brayton
A fossil fuel-fired power plant, which is in thecycle one of the part of the Combined Cycle
center of the Combined Cycle Power Plant, usedOperation and the training need to taken under
either the combustion turbines or the steams tothis total combustion cycle to know the cycle
provide the mechanical power into the electricalmuch more better. Combined Cycle Operator
generators. High temperature pressurized steamTraining is not so easy to take and it needs time
expands through the various stages of theto learn practically about the whole matter.
turbine, transferring this energy to the rotatingCombustion turbines are available also for burning
turbine blades.a wide range of liquid and the gaseous fuels from
 the crude oil to the natural gas.